Real Time Oscilloscope

Features

• Small, Light Weight Portable 20MHz Oscilloscope
• High Sensitivity (1mV/div) and 2Channel, Dual Trace 6 inch Internal Grid
• MAG, Simultaneous Sweep waveform : x1 and x10(x5)
• ALT TRIG : Synchronization between two different signals
• TV Sync. : Stable TV signal observation
• AUTO Focus : Auto-correction of focus diversion

Specifications

• CRT
  Acceleration Voltage : 1.9KV
  Valid Area : 6 inch (8 x 10 div) (div ~10mm)
• Vertical Deflection
  

  CH1, CH2 Sensitivity	5mV/div~5V/div (1-2-5 STEP,10RANGE)(±3%) 1mV/div~1V/div (x5MAG) ±5%
  Input Coupling	AC-GND-DC
  Bandwidth	DC : DC ~ 20MHz AC : 10Hz ~ 20MHz
  Elevation Time	About17.5ns
  Input Impedance	1M Ohm±2%, 25pF±3pF
  Maximum Input Voltage	400V(DC+AC peak) CH1 : Only Channel 1 CH2 : Only Channel 2 ADD : Addition of two signals(CH1+CH2) DUAL : Simultaneous Channel1,2 Operation
  Overshoot	Under 50%

  
  
  
• Horizontal Deflection
  

Sweep Mode	A, XY, ALT, MAG, x10 MAG
Sweep Time	0.1µs/div ~ 0.2 sec/div ±3% 1-2-5 STEP(x1), 20 RANGE
Sweep Expansion	0.1µs/div ~ 0.2s/div(x10MAG±5% 0.1µs/div UNCAL




• Triggerin
  

Trigger Mode	AUTO, NORM, TV-H, TV-V
Trigger Source	INT, CH2, LINE, EXT
Trigger Coupling	CH2
Sensivity NORM
A) (INT)	DC-5MHz : 2 div. 20~40MHz : 3 div.
B) (EXT)	DC-5MHz : 200mV 20~40MHz : 300mV
TV Synchronization	INT : 1 div EXT : 1Vp-p




• X-Y MODE
  

  Operation Mode	When X-Y Operation, CH1-X axis, CH2-Y axis
  Input Impedance	1MOhm ±2% 25pF
  Frequency Characteristics	DC ~ 500MHz, Phase Difference DC ~ 50KHz 3°

  
  
  
• Z axis
  

  Input Impedance	33K Ohm
  Max. Input Voltage	50V (DC+AC peak) MAX AC 1KHz
  Bandwidth	DC ~ 2MHz
  Input Signal	+5V(POSITIVE INPUT)

  
  
• CAL Voltage : 0.5V, Sine wave, 1KHz
• Operation Voltage : AC110V, 120V, 220V, 240V ±10% 50/60Hz
• Dimension & Weight : 335(W)x 140(H) x375(D)mm, 7.3kg
  
• Accessories
  - Power Cord 1EA
  - Fuse 2EA
  - Probe 2EA
  - Manual 1EA
  

At GIGA Electronics Ltd. our main aim is to offer to our customers the best and most effective solution to meet their
test & measurement needs through exceptional quality and reliability of our products and services.
We take a personal approach to each customer according to his individual needs.