Protek 9216A




Digital LCR Meter Protek 9216A is a useful tool measuring a device characteristics with various functions.
It has more than 13 orders of magnitude, basic accuracy of 0.05% and 5 test frequencies.

 

Features

- Basic accuracy of 0.05%
- 5 Test frequencies
- Store up to 9 setups in the memory
- Remote over RS-232C and GPIB/Handler(Option) Interface

Specifications
Measurement Modes AUTO, R+Q, L+Q, C+D, C+R
Equivalent Circuit Series or Parallel
Parameters Displayed Value, Deviation, % Deviation or Bin Number.
Deviation and % deviation are calculated from a stored relative value.
Averaging 2~10 Measurement
Measurement Range R+Q   R 0.0001Ω~2000Ω   Q 0.00001~50
L+Q   L 0.0001μH~99999H    Q 0.00001~50
C+D   C 0.0001㎊~99999㎌   D 0.00001~10
C+R   C 0.0001㎊~99999㎌   R 0.00001~99999kΩ
Test Frequency 100㎐, 120㎐, 1㎑, 10㎑, 100㎑
Frequency accuracy ±100ppm
Drive Voltage 0.1V, 0.25V, 1Vrms
Drive levels accuracy ±2%
Measurement Rate Slow, Medium, Fast: 2, 10 or 20
measurements per second at test frequencies of 1KHz and above 0.6, 2.4, or 6 measurements per second at 100z and 120Hz.
Ranging Auto or Manual
Triggering Through External Trigger, Continuous, Manual or Remote over RS232, GPIB or Handler Interface
Bias Voltage Internal → 2.0 VDC±2%,      External → 0~+40 VDC (fused @ 0.25A)
Conditions At least 30 minutes warm up, 23℃±5℃
Basic Accuracy 0.05%

Standard Accessories

- Radial Fixture : For measuring simply Radial od Axial type's parts, use in after connected in front LCR Meter
- GPIB / Handler Interface : It provides both an IEEE-488 interface and a Handler interface. All instrument functions can be controlled or read over the interface. DB25 male connector provides output lines to indicate binning information and instrument status and an input trigger line. The Trigger input in negative edge triggered TTL and is protected to +/- 15 Vlots
.
Optional Accessories

- Kelvin Clips : Provides connection of devices that are not easily accommodated in the fixture. Polarity is indicated for biased measurements.
- SMD Tweezers : Provides connection to Surface Mount Device Parts. Polarity in indicated for biased measurements.
- GUI Software

  Back to Protek Products

For further information, please Contact Us

Request a Quote

 
GIGA Electronics Ltd. - Innovative Electronic Solutions

At GIGA Electronics Ltd. our main aim is to offer to our customers the best and most effective solution to meet their
test & measurement needs through exceptional quality and reliability of our products and services.
We take a personal approach to each customer according to his individual needs.